Wings on a Prey

Status: In a Private Collection, Similar Reproduction Available. (Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

Commissioned for a gentleman in CT as a birthday gift for his wife, “Wings on a Prey” is small sculpture designed to sit atop a post outdoors or indoors. As it emerged from the flat sheet metal I hammered, it quickly became one of my favorite pieces, to date. The piece allowed me to use all aspects of the sheet metal forming process, to include making a wooden buck from the drawing I did, to shaping and welding the the more than 25 small pieces of metal together that emerged from the templates from the buck. The curves and dimensions offered many challenges, and every tool in my arsenal was used but I was satisfied with the end result.

The piece is hand-formed from T-304 16 Gauge stainless steel, with .080″ thick copper sheet for the beak and molten copper for the eyes. I also added a removable 3/8″ stainless steel threaded rod, extending from the base, for mounting the piece on its pedestal. The piece measures about 20″ in height, 8″ in depth and 9″ in width

Similar birds can be made and personalized with many effects, to include more details, different materials, different stances and other adornments that you might want to make it special.

“Wings on a Prey” and similar small sculptures are suitable for indoor or outdoor use.

Wings on a Prey

IMG_3928

IMG_3924

IMG_3919

IMG_3917

IMG_3956

IMG_4003

IMG_3929

Metal Being Formed

Metal Being Formed 2

Forming Buck

© 2014 – Kirt Rebello

Comedy/Drama Theater Masks – “Dos Cabezas Grande”

wall-hanging-dos-cabezas-grande-metal-artist-kirt-rebello

Status: In a Private Collection, Similar Reproduction Available. (Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

Although I have done several renditions of the “Comedy-Drama” theater masks for clients across the country, the commission for this set of masks was a wonderful opportunity for me to expand the limits of my artistic capabilities and test the limits of my tools… so much so, that I felt the pieces should be named something grand, and so “Dos Cabezas Grande” were born!

Primarily hand-formed from T-304 16 Gauge stainless steel, I was able to attain greater depth in the dimensions of the masks by tackling a long-overdue task of building my own “junkyard power-hammer.” You can check out a short video of the power hammer I built below.

Each mask measures about 36″ in height and 24″ in width, and the size and dimensions proved to be a little too much for my 47 year-old shoulders and my 24 year-old planishing hammer. While hammering the masks and smoothing with the planishing hammer, the planishing hammer broke and the desire for a power hammer quickly turned into a need.

Once the power-hammer was put in service the masks moved along quickly and soon headed to their new home in sunny California! Also incorporated into the masks are reclaimed 3/8″, 1/4″ and 3/16″ stainless steel rods and puddles of molten stainless steel are used to replicate the tears of joy and tragedy. Unlike the smaller versions of the theater masks that are connected together, “Dos Cabezas Grande” were designed to be individually hung. Each mask is welded together using the Tungsten Inert Gas (TIG) welding process.

Similar masks can be made and personalized with many effects, to include more details, different materials (like copper), and other adornments and facial expressions that you might want.

The Comedy-Tragedy Theater Masks and similar wall hangings are suitable for indoor or outdoor use.

Comedy-Tragedy Theater Masks

masks7

masks8

masks4

masks5

masks1

masks3

masks2

masks

Both Flat

© 2014 – Kirt Rebello

Copper Weathervane Base

Status: In a Private Collection, Similar Reproduction Available.
(Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

This copper weathervane base was made for a client who salvaged this weathervane from a home they lost to fire. The weathervane was atop their garage and survived the fire and they wanted to prominently display it in their new home, as a memento of their old home.

The base is hand-formed from .080″ thick copper and a 1″ stainless steel through the center to accept the post. The piece was welded together using the Tungsten Inert Gas (T.I.G.) welding process and the patina was obtained by oxidizing the copper with a “special solution.” It measures 12″ in height, 12″ in depth and 12″ in width

Similar bases can be made to display other forms of art and they can be personalized with many effects, to include more details, different materials, different shapes and other adornments that you might want to make it special.

Bases can be designed for indoor or outdoor use.

Weathervane Base

weathervane base

© 2014 – Kirt Rebello

Gillis Point Lighthouse #2

Status: In a Private Collection, Similar Reproduction Available. (Please contact me for more information.)

Application: Indoor Only

Signed: KR2014

Upon completing Gillis Point Lighthouse #1, commissioned as a birthday present by the family of one of the lighthouse’s land owners, I was commissioned to build a second but smaller piece as a present for one of the other land owners, by his wife. This piece is also made from various gauges of hand-formed and scribed stainless steel sheet metal, flat bar, round bar and angle iron, and it is accented with a roof and light tower that are hand-formed from copper. The piece stands about 9″ tall by 5″ wide and was welded together using the Tungsten Inert Gas (TIG) welding process.

This piece was outfitted with a light and is suitable for indoor applications only.

Gillis Point Lighthouse #2

gillis-point-lighthouse2-2

gillis-point-lighthouse2-3

gillis-point-lighthouse2-4

gillis-point-lighthouse2

© 2013 – Kirt Rebello

Gillis Point Lighthouse #1

Status: In a Private Collection, Similar Reproduction Available. (Please contact me for more information.)

Application: Indoor/Outdoor – Indoor Recommended

Signed: KR2013

Here’s my interpretation of the Gillis Point Lighthouse in Nova Scotia as it was displayed at the New York Yacht Club in Newport, RI. I was commissioned to build the piece as a birthday present by the family of one of the lighthouse’s land owners. This piece is made from various gauges of hand-formed and scribed stainless steel sheet metal, flat bar, round bar and angle iron, and it is accented with a roof and light tower that are hand-formed from copper. The piece stands about 18″ tall by 9″ wide and was welded together using the Tungsten Inert Gas (TIG) welding process.

This piece is suitable for both indoor or outdoor applications but would be better suited indoors. The owner plans to mount it on a wooden base and install some creative lighting. Upon its debut at the New York Yacht Club, a second but smaller piece was commissioned as a present for one of the other land owners, by his wife. See Gillis Point Lighthouse #2.

Gillis Point Lighthouse #1

gillis-point1-nyyc

gillis-point1-nyyc-2

gillis-point1-in-work

gillis-point1-1jpg

IMG_2937

gillis-point1

© 2013 – Kirt Rebello

Twisted

Status: In a Private Collection

Application: Indoor/Outdoor – Indoor Recommended

Signed: KR2013

Twisted is a mixed media abstract piece that I built with a piece of oak and some stainless steel tubing. I decided to call “Twisted” both for it’s form and for the struggle I had in naming it. The piece has many wonderful angles and it evoked excitement in me as it came together beautifully. I’ve held on to the oak base for several years, thinking to myself: “One of these days I’m going to use this for something cool!” and I was pleasantly surprised when the “something” became “Twisted.”

I found the oak base in a pile of wood from a long-ago cut tree. The pile was deep in the woods and appeared to have been cut decades ago and left to age… probably because it would’ve been difficult to split. The “twisted” pipes are bent and polished stainless steel pipes that I intertwined together, welded together using the Tungsten Inert Gas (TIG) welding process and mounted to the base.

Twisted is available and suitable for both indoor or outdoor applications but would be better suited indoors. Twisted measures 18″ tall by 18″ wide by 9′ deep and would make a great conversation piece for any home or office. Please contact me if you’re interested.

Twisted

Twisted

Twisted

Twisted2

Twisted

Twisted6

Twisted

Twisted3

Twisted

Twisted5

Twisted

Twisted7

© 2013 – Kirt Rebello

Chimed

Status: In a Private Collection. (Please contact me to commission a similar piece.)

Application: Indoor/Outdoor

“Chimed” is an abstract, interactive wind chime sculpture that is comprised of new materials, reclaimed materials and found objects. The design for the piece began to reveal itself as the found objects and reclaimed materials were gathered together.

The chime is made from a diagonally cut 9″ long piece of reclaimed 5-1/2″ stainless steel pipe, with 16 pieces of reclaimed 1/4″ stainless steel tubing hanging from reclaimed stainless steel washers. The center piece to the chime is a found billet aluminum internal cooling fan from an industrial electric motor, mounted to a piece of reclaimed 1″ stainless steel pipe, hanging from a found stainless steel spring assembly. The chime is mounted to the base and hanging from a found 2″ wide by 3/8″ thick piece of solid stainless steel bar that appears to have been some kind of protective rail or “bumper” in its previous life. The cement filled base is made of Corten steel and welded together using stainless steel, and it is highlighted with a stainless steel circle at the crux of the base.

The modern design of “Chimed” was intended to tie the piece together in a functional and attractive way that is versatile enough to compliment several interior and exterior design styles. It produces a wonderful and subtle chime of casual “tinks” from the hanging stainless steel tubing, complimented by a resonating “ring” from the billet aluminum fan.

The piece is suitable for indoor and outdoor applications and it measures 62″ tall, by 15″ wide by 28″ deep. Chimed would make a wonderful addition to any garden or yard and would work equally as well for many commercial and residential indoor applications.

Time with the Art – A short video of “Chimed”

“Chimed”

Chimed 1

“Chimed”

Chimed 2

“Chimed”

Chimed

“Chimed”

Chimed 3

“Chimed”

Chimed 4

“Chimed”

Chimed 5

© 2013 – Kirt Rebello

Solem Visum

Status: In a Private Collection

Application: Indoor/Outdoor

Signed: KR2013

“Solem Visum” or “Sun View” is an abstract sculpture that is comprised of new materials, reclaimed materials and found objects. The piece is designed to represent two different sun views and it is up to the observer to decide whether-or-not they are sunrises or a sunsets.

The sun view is framed out with the outer steel ring from the wagon wheel of a mid-1800’s horse-draw doctor’s carriage and the water and waves are made from reclaimed 1/8″ stainless steel plating. The sun is a found stainless steel drain cover, cut in half and welded face-to-face and its reflection is ground into the stainless steel “water.” The rays of the sun are 1/4″ stainless steel rods extending out to the steel ring, and the land and the cement filled base are made of Corten steel and welded together using stainless steel.

The piece is suitable for indoor and outdoor applications and it measures 57″ tall, by 39″ wide by 11-1/2″ deep. Solem Visum would make a wonderful addition to any garden or yard and would work equally as well for many commercial and residential indoor applications.

Solem Visum

Solem Visum 1

Solem Visum

Solem Visum 4

Solem Visum

Solem Visum 5

Solem Visum

Solem Visum 6

Solem Visum

Solem Visum 8

Solem Visum

Solem Visum 3

© 2013 – Kirt Rebello

Singularity

Status: In a Private Collection. (Please contact me to commission a similar piece.)

Application: Indoor/Outdoor

Signed: KR2013

“Singularity” is a kinetic abstract sculpture that is comprised of new materials, reclaimed materials and found objects, and it is reflective of my fascination with the origins of our existence. The “singularity” is, among other things, believed to be the point from which the Universe was created and it is the theoretical center of a black hole where, dimension and spacetime theoretically breakdown and become infinite. My fascination with the origins of our existence is constant and I enjoy any time that I can represent the conundrum of contemplating the Universe.

Singularity is designed to represent some of the basic atomic structures of our existence, and uses found objects from still-developing technologies to represent this basic, yet still not fully understood structure, of our existence. To represent the the gravitational orbits that hold matter together, I used the outer steel bands from a mid-1800’s horse-draw doctor’s carriage. I found it fitting that this old mode of transportation, once used for thousands of years, was quickly outdated by the automobile, as well as the doctor it once carried who practiced medicine that is now viewed as barbaric. The steel bands come together at the bottom and the top with what I believe are stainless steel nozzles, that appear to be from an oil-fired power plant (a technology whose days are numbered). At the “atomic center” of the piece is a stainless steel ball resting atop a stainless steel rod. The ball was once used as a fluid level float for a pump system, until it was replaced by electronic sensors.

From the top of the stainless steel ball, through hole at the center of the top nozzle, conical dimensional lines can be drawn that eventually coming to a point of non-dimensional, “singularity.”

The upper portion of the piece rotates on a front wheel bearing assembly from an SUV, yet another mode of transportation whose days are numbered, and the piece rests atop a cement-filled based made of Corten steel and stainless steel, to ensure durability and stability for decades to come.

The piece is suitable for indoor and outdoor applications and it measures 65″ tall, by 39″ wide and deep. Singularity would make a wonderful addition to any garden or yard and would work equally as well for many commercial and residential indoor applications.

Singularity

Singularity

Singularity

Singularity 5

Singularity

Singularity 2

Singularity

Singularity 1

Singularity

Singularity 4

Singularity

Singularity 3

© 2013 – Kirt Rebello

Peace Sign

Status: Private Collection, Similar Reproduction Available. (Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2013

This wall hanging is a rendition of the Peace Sign with a flower in the middle. I made this for my niece who at 6 years-old once said to me: “Uncle, do you know what I want for my birthday?” and I, expecting to hear about the latest toy on the market, said “What?” and she said “One of your art pieces. I don’t care what it is, it can be anything. I just want one of your art pieces.” How could I say no! So, knowing that she and her sister love peace signs, I made this for her 7th birthday. Now I’ll need to figure out what I’m going to make her sister’s birthday. 🙂

The Peace Sign is hand-formed from reclaimed T-304 16 Gauge stainless steel and the flower is made from reclaimed 18 gauge copper, and it measures 11” in diameter, 1-1/2” in depth. The piece is welded together using the Tungsten Inert Gas (TIG) welding process. Similar pieces can be made and personalized with a different center or without an item in the center.

The Peace Sign and similar wall hangings are suitable for indoor or outdoor use.

Peace Sign

Wall Hanging - Peace Sign

© 2013 – Kirt Rebello