Flounder de Ferrum

Status: In a Private Collection, Similar Reproduction Available.
(Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

“Flounder de Ferrum” was created for the Art-Drive‘s 2014 “Flippin Flounder” campaign, where Art-Drive members are each tasked with making a flounder in their medium. The flounders are displayed in the local area before the drive, and then auctioned off as part of a fundraising campaign in the days leading up to, and after, the drive.

The Flippin Flounders debuted July 18th at the Westport Rivers Winery’s Friday evening concert and following their debut, they are displayed at various locations in Dartmouth and Westport, MA until the Art-Drive open studio tour August 9th and 10th.

You can see “Flounder de Ferrum” on display at Partner’s Village Store and Kitchen until August 8, 2014.

On August 9th and 10th the Art Drive will take place and my shop and artwork will be on display and available for purchase. Please feel free to stop by and say hi!

From August 2-12, 2014, the Flippin Flounders will be auctioned off through an EBay Auction. The proceeds from the auction will go to benefit the Lloyd Center for the Environment; the Art-Drive and the individual artists.

Flounder de Ferrum is hand-formed and english wheeled from T-304 16 Gauge stainless steel and molten stainless steel for the eyes and other features. The piece was welded together using the Tungsten Inert Gas (T.I.G.) welding process and the patina was obtained by oxidizing the stainless with heat. It measures about 22″ in height, 4″ in depth and 42″ in width

Similar fish can be made and personalized with many effects, to include more details, different materials, different stances and other adornments that you might want to make it special.

“Flounder de Ferrum” and similar wall hangings are suitable for indoor or outdoor use.

Flounder de Ferrum

flounder5

flounder6

flounder7

flounder8

flounder3

flounder4

flounder2

flounder1

© 2014 – Kirt Rebello

Wings on a Prey

Status: In a Private Collection, Similar Reproduction Available. (Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

Commissioned for a gentleman in CT as a birthday gift for his wife, “Wings on a Prey” is small sculpture designed to sit atop a post outdoors or indoors. As it emerged from the flat sheet metal I hammered, it quickly became one of my favorite pieces, to date. The piece allowed me to use all aspects of the sheet metal forming process, to include making a wooden buck from the drawing I did, to shaping and welding the the more than 25 small pieces of metal together that emerged from the templates from the buck. The curves and dimensions offered many challenges, and every tool in my arsenal was used but I was satisfied with the end result.

The piece is hand-formed from T-304 16 Gauge stainless steel, with .080″ thick copper sheet for the beak and molten copper for the eyes. I also added a removable 3/8″ stainless steel threaded rod, extending from the base, for mounting the piece on its pedestal. The piece measures about 20″ in height, 8″ in depth and 9″ in width

Similar birds can be made and personalized with many effects, to include more details, different materials, different stances and other adornments that you might want to make it special.

“Wings on a Prey” and similar small sculptures are suitable for indoor or outdoor use.

Wings on a Prey

IMG_3928

IMG_3924

IMG_3919

IMG_3917

IMG_3956

IMG_4003

IMG_3929

Metal Being Formed

Metal Being Formed 2

Forming Buck

© 2014 – Kirt Rebello

Comedy/Drama Theater Masks – “Dos Cabezas Grande”

wall-hanging-dos-cabezas-grande-metal-artist-kirt-rebello

Status: In a Private Collection, Similar Reproduction Available. (Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

Although I have done several renditions of the “Comedy-Drama” theater masks for clients across the country, the commission for this set of masks was a wonderful opportunity for me to expand the limits of my artistic capabilities and test the limits of my tools… so much so, that I felt the pieces should be named something grand, and so “Dos Cabezas Grande” were born!

Primarily hand-formed from T-304 16 Gauge stainless steel, I was able to attain greater depth in the dimensions of the masks by tackling a long-overdue task of building my own “junkyard power-hammer.” You can check out a short video of the power hammer I built below.

Each mask measures about 36″ in height and 24″ in width, and the size and dimensions proved to be a little too much for my 47 year-old shoulders and my 24 year-old planishing hammer. While hammering the masks and smoothing with the planishing hammer, the planishing hammer broke and the desire for a power hammer quickly turned into a need.

Once the power-hammer was put in service the masks moved along quickly and soon headed to their new home in sunny California! Also incorporated into the masks are reclaimed 3/8″, 1/4″ and 3/16″ stainless steel rods and puddles of molten stainless steel are used to replicate the tears of joy and tragedy. Unlike the smaller versions of the theater masks that are connected together, “Dos Cabezas Grande” were designed to be individually hung. Each mask is welded together using the Tungsten Inert Gas (TIG) welding process.

Similar masks can be made and personalized with many effects, to include more details, different materials (like copper), and other adornments and facial expressions that you might want.

The Comedy-Tragedy Theater Masks and similar wall hangings are suitable for indoor or outdoor use.

Comedy-Tragedy Theater Masks

masks7

masks8

masks4

masks5

masks1

masks3

masks2

masks

Both Flat

© 2014 – Kirt Rebello

Copper Weathervane Base

Status: In a Private Collection, Similar Reproduction Available.
(Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2014

This copper weathervane base was made for a client who salvaged this weathervane from a home they lost to fire. The weathervane was atop their garage and survived the fire and they wanted to prominently display it in their new home, as a memento of their old home.

The base is hand-formed from .080″ thick copper and a 1″ stainless steel through the center to accept the post. The piece was welded together using the Tungsten Inert Gas (T.I.G.) welding process and the patina was obtained by oxidizing the copper with a “special solution.” It measures 12″ in height, 12″ in depth and 12″ in width

Similar bases can be made to display other forms of art and they can be personalized with many effects, to include more details, different materials, different shapes and other adornments that you might want to make it special.

Bases can be designed for indoor or outdoor use.

Weathervane Base

weathervane base

© 2014 – Kirt Rebello

Eagle Globe and Anchor

Status: Private Collection, Similar Reproductions Available. (Please contact me to make a similar piece.)

Application: Indoor/Outdoor

Signed: KR2013, KR2014, KR2015

This wall hanging is a rendition of the United States Marine Corps’ emblem, also known as the “Eagle Globe and Anchor” or “E.G.A.” and it was commissioned by one of our “nation’s finest” in Texas. The current design of the Eagle Globe and Anchor was adopted as part of the official Marine Corps emblem in 1955, closely based on a previous design that was approved for use on Marine Corps uniforms in 1868.

This version of the E.G.A. is hand-formed from T-304 16 Gauge Stainless Steel, 1/8′ stainless steel rod, a found stainless steel item and a spot of copper welded into the eye of the eagle. , and it measures 21” in height, 18” in width and 3” in depth. The piece is welded together using the Tungsten Inert Gas (TIG) welding process.

Since the initial commissioning of this piece, several more have been commissioned for Marines across the country. The Eagle Globe and Anchor and similar wall hangings are suitable for indoor or outdoor use.

Eagle, Globe and Anchor

Wall Hanging - EGA

Eagle, Globe and Anchor

Wall Hanging - EGA4

Eagle, Globe and Anchor

Wall Hanging - EGA2

Eagle, Globe and Anchor

Wall Hanging - EGA3

Eagle, Globe and Anchor

Wall Hanging - EGA5

© 2013 – Kirt Rebello